Questions & Answers for: 2002 ford ranger problems misfires

Question about 2002 Ranger Regular Cab

1 Answer

CAN A SMALL EVAP LEAK CAUSE A CYLINDER MISFIRE Not likely. Probably two different problems.

Ad

Question about 2002 Ranger Regular Cab

3 Answers

2002 ford ranger truck wont turn over when trying to start it up, has gas in it, was driving it , made a weird noise then died, couldnt get it to restart, towed it in let it set for about a week, then

Ad

Question about 2002 Ranger Regular Cab

1 Answer

2002 Ford Ranger Edge V-6 is misfiring. My 2002 Ford Ranger Edge V-6 is misfiring after it warms up when trying to accelerate or under a load, going uphill. The vehicle jerks around 2500 rpm and above

Question about 2002 Ranger Regular Cab

1 Answer

2003 ranger 3.0 po306 #6 hole misfire. did all the major diagnose comp,ign coil checked good, wires great, injector pulse good ,no vac leaks,no other codes triggerd, so i started thinking about the ...

Question about 2002 Ranger Regular Cab

2 Answers

...Ford Ranger 4 cylinder 2.3ltr and it keeps just falling on its face,stutering,jerking,mis or back firing. And its get'n worse and worse. I got the code 1301 #1 cylinder misfiring so i put new ...

...2002 V6 4.0 Ford Ranger. I started the car and it started shaking, the check engine light was flashing. The shaking was inconsistent at first, but with time grew consistent. Burning smell accompanied ...

Question about 2002 Ranger Regular Cab

1 Answer

ranger problems check engine light on and idling very rough check engine light is on and idling very rough? run fault codes and check for O2 sensor problem and MAP/MAF sensor problems. If it is ...

Question about 2006 Ford Ranger - Sport, SuperCab, short bed, with cab high shell - Silverguard Plus Car Cover

1 Answer

...2002 ranger misfire rough idle Jul 27, 2007 1997 Ranger Misfires May 31, 2007 More results from www.topix.com Part 1 -How to Test a Misfire Problem (Ford 4.0L V6) troubleshootmyvehicle.com > Ford > ...

2002 ranger 2.3 codes po171 and po301 changed upstream o2 sensor still get codes any ideas? P0301 is a engine misfire code for #1 cylinder , spark plug or plug wire problem or a bad fuel injector . ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...