Questions & Answers for: 2001 saturn leaking oil

...2001 Saturn Sc with the 1.9L. It has a high idle but seemingly no oil leaks. It will idle about 2500 rpm for a few seconds then go down to normal when sitting. When I drive, it seems as if the idle ...

Ad

2001 Saturn,blows Blue smoke only when ideling I have a 2001 Saturn SL2, my car blows out Blue smoke BUT only when left ideling. When I drive regularly, or on the express way there is no smoke. Yet ...

Ad

...2001 saturn sl1. where is the water pump. ive got a leak that is coming from the right side of the oil pan, when you start the engine it starts flowing out. We checked the oil and it was clean, with ...

Question about 2001 L-Series

1 Answer

2001 Saturn L. Oil is leaking, it is not the head gasket. Tore engine apart and replaced gaskets. Stopped leaking for about 6-7 months and it started to leak again. Did oil change last week and needed

...2001 Saturn SL1. Its leaking alot of oil. I think its coming from what looks like an oil pressure sensor? this is very common. Just replace the sensor. Use a little teflon tape on the threads of the ...

Question about 2001 L-Series

1 Answer

...Saturn L-Series is leaking cool water into my passenger floorboard. I think the AC drain is clogged, and I need to know where the drain is located. Guys at oil change locations are usually good at ...

2001 saturn sc2 had a coolant leak from head gasket pulled head had head rebuilt put it all back together leaking oil from right rear of head where front cover, block and head meet resealed cover and ...

2001 Saturn Sc1 to overheat without leaking antifreeze? My car is not leaking any antifreeze out of it, but it steadily loses it somewhere and continuously over heats. Clogged radiator, worn out water

...2001 saturn sl2 SL2 pan leaks and too many things obstructing pan to DIY Depends on shop rate. But looking at about 4 hours labor plus parts. So I would guess around $300 to $500. I'm guessing you ...

Question about 2001 L-Series

0 Answer

how to repair a leaking oil pan two holes in oil pan If you can get it clean and the holes aren't too big, you can use epoxy putty like Metal Weld.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...