2001 focus/ect sensor need to know the location of the engine coolant temp. sensor on 01 focus, "zetec" motor. its screwed into the cylinder head ,when you fit a new 1 dont overtighten it they sense ...
2001 ford focus Is there a engine diagram for 2.0l to see how the belt goes on properly HAYNES repair manual, page 1-13 two diagrams; 2.0l spi, and, 2.0l zetec
2001 ford focus shuts off after making more than 1 stop. will not start for 20-30 mins. if its a 16v engine then it could be sticking valves usually due to using the wrong grade of engine oil.if not ...
need a serpentine belt diagram for 2001 ford focus zx3 with ac need the diagram here a go http://1.bp.blogspot.com/_CyueFe0aN9U/SQeam-_sbtI/AAAAAAAAABo/erq5IJ5-t_c/s400/88003gd1L.gif
...ford focus I have a 2001 1.6 focus that has started to misfire and judder,the engine management light has also started to flash. On removing the leads of cylinders 1 and 4 the engine tone does not ...
2001 ford focus dies with 1/4 tank of fuel my 2001 ford focus dies when the fuel gauge gets below a 1/4 tank of fuel what could this be Your problem is the pump pick up in the tank is either broken or
2001 ford focus se what are the torque specs. for head bolts on 2.0 soc motor DO not retighten the cylinder head bolts Tighten the cylinder head bolts in three stages in the sequence indicated 10-----
...2001 ford focus 4 straight 2001 Ford Focus 2.0 liter SOHC L4 VIN "P" Hope this helps (remember rated and comment this). the wires are numbered ,and the longest one is for cylinder number 1.far ...
...2001 ford focus? R15 and R16 refers to relay POSITIONS. These relay positions in your 2001 Ford Focus are located in the battery junction block. (see lower right of diagram below)In this case, ...
WHAT DOES THE IDLE AIR CONTROL LOOK LIKE IN 2001 FORD FOCUS See diagrams #1 and #2 below: #1) Idle air control Valve #2) Location saailer
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
