Question about 1990 Dakota
...dodge dakota front suspension. Dodge Dakota front end installation. Upper control arm to frame and upper control arm pivot nuts.Lower control arm bolts (forward and smaller rear bolts) two large ...
2001 dakota, are the sealed bearings on front torqued to 185 ? yes thats right those trucks usually say the torque spec on the old nut that holds the bearing on
...dodge dakota? Unsure as to what you are calling the King nut but here are the torque specs for your front end. Steering Gear-To-Cradle Bolt...........135 ft pnds Steering Gear-To-Crossmember Bolt ...
...2001 dodge dakota 4x2. How many pounds of torque do i aply to the spindle nut when replacing? understandably you want to do things right. i do this job by tightening the nut with channel lock pliers, ...
Dodge Dakota 2 wheel drive- front wheel hub. In inch-lbs if possible. Spindle nut. Tighten the nut to 185 ft. lbs. (251 Nm). Inch pounds is not an option, this critical torque spec is FT lbs. axle hub
torque specs for a 2001 dodge dakota front hub bearing axle nut Hi there! According to Haynes Manual, Its says 185 Ft-lbs. Good luck
Question about 2005 Magnum
torque specs for 2005 Dakota two wheel drive front wheel bearings If you are talking about the 3 bolts on the front wheel hub bearing assembly, then between 85 and 90 ft lbs
...dodge dakota 4x4 and need the torque setting for the 3 hub bolts on the front end also the axle nut torque setting The torque for the hub bolts is 120 ft. lbs The torque for the axle nut is 185 ft. ...
Question about 2005 Magnum
...torq spec on front hub nut on a 2000 dodge Dakota quad cab 2 wd v6 Hi Tim,here's a link to your front hub and how much to torque it. Repair Guides Front Suspension Front Hub And Bearing AutoZone ...
Question about 2001 Dakota
...for a 2001 3.9 V6 in a quad cab Dakota with a 4 spd auto trans ? Here is JD Powers specs on the Dakota ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions