Questions & Answers for: 2000 silverado misfire cylinder 2

2000 chevy silverado cylinder 2 is misfiring The vehicle is sputtering when I drive and it doesn't have much power at all. The service engine light comes on and when I put a diagnostic scanner on it, ...

Ad

...2000 Silverado 1500? I was told that spark plug #5 was misfiring. Which one is #5? i presume that is a v-6 ? Stand at the side of the motor. Look toward the front... you will note one cyclinder is ...

Ad

...cylinder misfire detected service engine lights on. hooked computer up to it and got 4 codes. 1/4 random / multiple cylinder misfire detected 2/4 02 sensor circuit High Voltage (bank 2 sensor 2) 3/4 ...

2000 CHevy Silverado misfire code I have a random cylinder engine misfire, it makes my truck studder while driving. I have replaced the cap, rotor, plugs, wire, coil, ignition module, EGR valve, ...

...1 misfire and Catalytic efficiency thread hose are 2 problem. Please help!!! Thank in advance Chevy Silverado 1500, V6, 4.3L May want to check your oxygen sensors to make sure they are not

Question about 2000 Silverado 1500

2 Answers

...2 refers to your engine cylinders.The cylinders on left are one bank,cylinders on right are another.I am assuming you discovered this through a scan tool or code reader.This problem usually refers to ...

misfire/ communications between computer and cylinder 2 Computer not telling coil for cylinder number two to fire, new plugs, new plug wires, new coil pack, what else could it be? Either there is a ...

Question about 2000 Silverado 1500

2 Answers

...cylinder misfire code. Sometimes it starts and runs fine. Others not at all . Will turn over getting fuel and fire to plugs. Any advice? Also just changed my intake gasket. Forgot to mark the ...

2000 chevy silverado p0171 ; p0174; p0300 Sounds like you have a serious vacum leak.; DTC 0174 and 0174 are lean conditions on bank 1 and bank 2, 0300 is random misfire. The only thing I can think of ...

...2000 silverado 5.3. been working on it for a while so i'll explain what I've done so far. It has a random cylinder misfire. So I bought a crank position sensor. BOOM fixed ran for 3 days 0 misfires. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...