Questions & Answers for: 2000 pontiac grand key turn

...2000 pontiac grand am gt.is it possible to bypass the security system. the key and tumbler need replaced. if the car does not start now turn key to on position for 12 minutes then try to starts this ...

...pontiac grand am ignition on dash\ How does !999 pontiac grand am ignition on dash How does one get the ignition cylinder out. ****DISCONECT BATTERY!!!**** 1st - pop off the face plate ring 2nd - ...

...2000 grand am security light comes on and the car will not start for 10 to 15 minutes. Turn the key on and wait for the security light to stop blinking (may take about ten minutes). Then turn the key ...

2000 Garnd Prix Key will not turn either to start or accessories My Pontiac Grand Prix will not let me start my car or even turn on the accessories position. But previous to this, the key would ...

...2000 Pontiac grand prix GT. Last night i shut off my car and the key would not come out of the ignition. Any thoughts on what I could do to get my key out of their. Two inches below where you put the ...

...2000 pontiac grand am gt the key will not turn in the ignition after installing a cd player u've tried resetting the battery in case it was the anti theft relay the pass lock system will not affect ...

...oil light" on a 2000 How do you reset the " change oil light" on a 2000 Grand Am GT? turn key on without starting engine, and press gas pedal to the floor 3 times quickly. start car. ...

...2000 pontiac grand am gt. you put your ignition key into the lock cylinder. if you put the right key in, it fits and turns the ignition switch. so your ignition switch is more or less directly behind ...

...2000 grand am gt and the key does not turn at ALL. i have to be there trying for like 15 minutes and it will randomly turn. what can be wrong? Might be the ignition lock cylinder is out of alignment ...

2000 Pontiac grand prix ignition key won't turn off all the way and won't come out Ignition key stuck Good chance your key is worn out. You may have to use more force to get it back and out turning ...