Questions & Answers for: 2000 lexus rx 300 tail

Ad

Question about 2000 RX 300

1 Answer

...2000 Lexus RX300? open up the rear hatch and remove the panel in the corner you are replacing the blub and then you see small screws or nuts that you have to remove and it maybe the kind you just ...

Ad

2000 lexus rx 300. I have the bulb, how do I do it? Lift the hatch. The tall center light is located behind the upper hatch inside panel. There are two panels need to remove. One panel is on the right

Ad

2000 Lexus RX 300 - VSC Light comes on and brake pulsation 2000 Lexus RX 300 - VSC Light comes on and brakes pulsating on initial acceleration; this an intermittent problem. Any ideas on what is ...

Tail lights don't work. Fuse is goo and bulbs are Tail lights don't work. Fuse is goo and bulbs are good. check for voltage at the fuse and at the light bullb socket. If you have juice at the fuse and

LIGHTS ON A 2000 LEXUS RX 300. WOULD BE HELPFUL IF THERE ARE PICTURES OR A VIDEO TO SHOW ME. THANKS YOU CAN BUY A HAYNES REPAIR MANUAL.IT HAS PHOTOS TO SHOW YOU AND TELL YOU HOW TO REPLACE PARK LIGHTS

...2000 lexus rx 300 bulbs are fine, all other lights work fine You may have a fried fuse. Look in your owners manual to find out which fuse it is in the fuse box diagram. If that is the problem make ...

Question about 1999 RX 300

1 Answer

my break light and and tail light on both side of the trunk not workin for my lexus rx 300 but the bout works on each side panel it sounds like the bulbs are blown

tail lights are not working, replaced the fuse and all bulbs, still not working. Brake lights, backup lights, third brake light and license plate lights all working. Tail lights do not. Sounds like ...

Question about 2002 RX 300

1 Answer

RX-300, and the Rear Light Failure Warning light on the dash is on all the time Its telling you that 1 of the tail/brake lights bulbs isnt working. its logical

...Lexus RX 300 2000 Model Please i need to get the engine number on the Lexus RX 300 2000 model. where can i get it? usually stamped into the block so look for a flat section just below cylinder head ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

20324 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...