Questions & Answers for: 2000 kia sephia belt tensioner

how to set the timing in the kia sephia 2000 model how can i set the timing of the kia sephia when the timing belt is broken?. i noticed 2 marks on the cam shaft You need a timing light and a new belt

Ad

...bend e.g. FLAT screwdriver. Be SURE not to cut or damage the belt. reverse proceedure to replace the belt. The tensioner has about 15 lbs of tension. In other words it is stiff, but not

Ad

...2000 Kia Sephia? Hello smg86 and thank you for asking your question here on fixya.com. I have actually written a general information article that will walk you through the general process of changing ...

Question about 2000 Sephia

1 Answer

2000 kia sephia vss location 2000 kia sephia vehical speed sensor location your vss location is on the top of the transmission towards the firewall. its on the right side of the rear engine mount. but

2000 kia sephia LOOSEN YOUR ALTERNATOR PIVOT AND TENSIONER MOUNTING BOLT.TO RELIEVE BELT TENSION ROTATING THE ADJUSTING BOLT..THEN WHEN BELT HAS ENOUGH SLACK IN IT.YOU CAN REMOVE IT.WHEN REPLACING NEW

kia sephia 2000 automatic spring tension system. What is that? I am trying to put a new alternator belt on , and I'm suppose to loosn the tension pulley but my kia doesnt have a tension pulley on it. ...

Question about 2000 Sephia

1 Answer

...2000 Kia Sephia. I did not have to loosen anything, the belt went right on and is loose. How do I adjust it to make is right? 1-----wrong belt 2-----wrong routing 3-----brocken tensioner 4-----most ...

...2000 kia sephia? Unfortunately, Kia does not publish instructions in the service manual on how to adjust the belt tension.  They do, however, publish bet tightening specifications.  There ...

Where are timing marks for a 2000 kia sephia? Replacing timing belt on 2000 Kia Sephia and need to line up timing marks. Where are the marks located? On the cam cogs or cam,s also front pulley.

...2000 kia sephia Loosen the vertical bolt on the tension bracket by turning left, then slide belt off pulleys when you have enough slack, use a tension guage to reinstall and tighten to proper

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...