Questions & Answers for: 2000 jeep cherokee 4 cylinder

2000 Grand Cherokee Laredo 4.0L Replacing the head gasket and can't find specs for the Head Bolt Torque for my friend's 2000 2000 Grand Cherokee Laredo 4.0L the torque is a 4 step process 1 torque all

Ad

...2000 jeep cherokee and random cylinders are misfireing so i changed the spark plugs and now its just reading that cylinders 4 and 5 are misfireing. it drives fine around town but if i go 70 or a ...

Ad

Question about 2000 Grand Cherokee

1 Answer

...jeep grand cherokee I wrote all engine spec for a 2005 jeep grand cherokee 3.7L 6 cylinder 1-6-5-4-3-2 4.7L 8 Cylinder 1-8-4-3-6-5-7-2 5.7L 8 Cylinder 1-8-4-3-6-5-7-2 let me know if this help

...jeep Cherokee classic straight 6 4.0 liter? I am replacing the head gasket and need to find the lbs of torque. Thank you for any advice, pictures, etc. Torque sequence ------------------ front | 12 8 ...

...of car bolts down left side are 8/4/1/5/9 bolts down right side are 7/3/2/6/10. left side meaning distributor side. A four cylinder engine has ten (10) bolts. A six cylinder has fourteen (14)

...cylinder head bolts in the following sequence. Tighten all bolts in a single sequence to 50 Nm Back the bolts off 1/2 turn. Tighten the bolts in sequence shown to 50 Nm . Rotate all the bolts in a ...

JEEP CHEROKEE LTD. 4.0? Torque settings are 110 ft LBS for nine of the ten bolts one bolt is 100 ft LBS /#1 Tighten all bolts in sequence 1 to 10 at 22 ft LBS #2 tighten all bolts 1 to 10 at 45 ft LBS

...jeep cherokee 4 cylinder torque specs crankshaft No torque specs about this CKP sensor... The CKP sensor is located on the transmission bellhousing. Disengage the sensor wiring connector and remove ...

Cherokee loreado str 6 valves and cover Cylinder Head Cover Bolts . . . . . . . . . . . . . . . . . . . . .10 N·m (85 in. lbs.) 85 in. lbs = 7 ft. lbs Basically... snug, not tight. Don't want to crush

...Jeep Cherokee 4.0? Head bolt pattern 4.0 - Jeep Cherokee Forum https://www.cherokeeforum.com > head-bolt-pattern-4-... Apr 12, 2017 - step 4...tighten all bolts except #11 to 110ft/lbs, then tighten ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...