Questions & Answers for: 2000 ford windstar motor mount

Question about 1999 Windstar

3 Answers

...ford windstar?thanx for your assistance. The sensor is mounted on the throttle body between the air cleaner assembly and the air cleaner outlet tube. Thanks for using FixYa - a 4 THUMBS rating is ...

Ad

Question about 1996 Windstar

1 Answer

...ford windstar locating the vehicle speed sensor for a 1997 ford windstar IN THE PASSENGER WHEEL WELL YOU WILL HAVE TO REMOVE THE REAR MOTOR MOUNT TO GET TO IT...AND MAKE SURE THE ENG..IS COLD

Ad

2000 ford windstar Should be under the vent panel. under the wipers. Hello redrock. The computer is mounted under the cowl panel on the right side. The wiper arms need to be removed and then the cowl.

2000 ford windstar 3.8L Front heater has 2000 ford windstar 3.8L Front heater has stopped working. Rear heater works. what stopped? the air doesnt blow,if thats the case then replace the blowermotor ...

Question about 1999 Windstar

1 Answer

motor mount location ht haaw many motor mount have one motor there are two mounts for the engine, they are under the engine block and you can only get at them from under the van, u must pull the ...

2000 Ford Windstar has developed a shudder and knocking when accelerated or in a strain (like uphill). The problem seems to be located on the driver's side and from the sound (Knocking) seems to be in

Question about 2000 Windstar

2 Answers

...2000 ford windstar 3.8 liter v6. any help?? My other half drives a 99 windstar think 2000 is the same though. It was trial and error when I did mine. Through the top or Bottom, I figured out that the ...

...spark plug fireing order on a 2000 3.8 ford windstar my wires are crossed Hi. Here firing order of 2000 3.8 Ford Windstar. The engine is mounted sideways on the ford windstar - not like this ...

wheres the idel motor located on a ford windstar 2000? Do you mean IAC Idle air control valve?

...ford windstar Undo the nuts, jack the engine upwards. Take the mount out, put the new one in. Bolt the new mount to the body. Lower the engine onto the mount and tighten the engine bolt. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...