Questions & Answers for: 2000 dodge dakota crank sensor

...dodge dakota with a 3.9 liter engine 2wd auto. Can not find crank sensor on 1995 Dodge Dakota how hard is it to replace the sensor should be located in the top of the transmission right behind the ...

...2000 dodge dakota with a 4.7 V8 ? The cam sensor on the 4.7 is located toward the forward edge of the right cylinder head (passenger side). This has a 3 wire connector, tan/with yellow tracer is ...

...2000 dodge dakota with the 4.7 Hello max06197: My name is Roger and I will help. You will find the crankshaft position sensor mounted into the right rear side of the engine block. Just behind the ...

...2000 dakota now having shifting problems is something not connected correctly from wiring harness you may have damaged the crank sensor when you removed the engine. It is located at the top of the ...

...locate on a 1998 dodge dakota 2.5 Should be bolted right before the transmission (it has a wire connected to the harness) on the upper side of the engine (near the interior). See Chilton manual

how to fix a crank sensor? The sensor is located at the front of The engine just off the crank pulley, very easy to replace

Dodge Dakota 200 4.7 v8 Runs and stops, in few minutes it will restart, run for days stops at low speeds ( is it a sensors , computer?? Some say cam or crank sensor know body knows ,all want sell new ...

...dodge Dakota isn't getting spark but is getting gas. I just put in another motor out of a 2000 but used all my stuff off my old motor. Crank sensor ? Is it located in the same place as old one ? Is ...

...2000 dodge Dakota sport V.8 4.7 and replaced the cam, crank and heat sensor and still doesn't want to turn over. Lined up all the timing marks and still no spark. 2000 Dodge Dakota Service Repair ...

2000 Dodge Dakota. Where is the EGR valve location please? Question edited for clarity. Question moved to model category. 3.9L EGR valve location Dakota Durango Forum https://www.dakota-durango.com > ...