Questions & Answers for: 2000 chevy malibu 3 removing

...coming off 98 chevy malibu with 3100 engine? check the pulley if it wobbles alot replac it. or, bolt may be comeing loose put red locktight on the bolt adn torque it to 76 foot pounds rank my ...

...2000 Grand Marquis? It has to be pressed off with a harmonic balancer removing tool similar to this ...

...2000 malibu chevy Check the harmonic balancer. It's the pulley thats on the bottom of the engine in the center. Look at it with a flash light. The face of it should be flat, if it is coming apart you ...

...chevy malibu V6 There is a tool made for that specific job. Many of the larger parts stores will loan or rent you one. It is called a harmonic balancer puller. (fancy name huh?) They aren't too ...

...2000 oldsmobile intrigue The short answer to your question is: 1. Raise the car on the passenger side and remove the front wheel. 2. Remove the belts on the harmonic balancer. 3. Remove the retaining ...

2000 chevy malibu and will cost approx. $380.00. Also is the rear main seal the same thing as the crankshaft seal??? Thanks! Well sometimes.... the front crankshaft seal is usually called a crank seal

...Chevy Malibu , I just had a belt and a harmonic balancer replaced. Please note that this was not happening before the belt and balancer were replaced. crank shaft sensor cv shaft going bad...go to ...

...Chevy Cavalier needs the harmonic balancer replaced. Is the repair worth the cost? Hello Barbette, The harmonic balancer is basically a counterweight attached to the front of the engines crankshaft. ...

3 https://www.youtube.com/watch?v=aUDYtGpb3N4 Chevy Vortec Harmonic Balancer Removal https://www.youtube.com/watch?v=j-VwYyJj4Ws Where I live most auto part store will allow you to use tools. You have

...2000 Chevy Impala You figure that the harmonic balancer is mounted on rubber. the rubber will get old, shrink and get hard, this will allow the outer ring to move on the inner ring. Only option is to ...