Questions & Answers for: 2000 chevy blazer ground wire

chevy Blazer having problems with passlock. Where does the black and orange wires get connected to? Please help The black should be ground, The orange should be 12 volts, there should be another wire.

...2000 chevy s-10 blazer, no fuel we replaced fuel pump, truck ran great all day. next day truck wont start, cant here fuel pump buzzing. checked fuses, relay all seems good, but no power to fuel pump, ...

...2000 chevy blazer? I quit a week ago started the next morning, quit again yesterday, pump not running relay checks out, jumper pump does not run? You do not have a switch like a ford. If you have ...

...2000 chevy blazer vortec 4.3 thats has the "spider" fuel rail. i have presure all the way to the intake lines. i have spark but it will not start i changee the fuel pump a couple months a go.changed ...

2000 chevy blazer starts sometimes and sometimes not. replaced starter, spark plugs and wires and fuel pump. still same problem. could it be the mass air flow meter? Jackie Check for spark by removing

2000 chevy blazer are they all ground wires I don't know what you mean because the pump black power and white ground would be much thicker then the fuel gauge sending unit black power and white return

...2000 chevy blazer do not want to burn up fuel pump by hooking to the wrong wire has a 4.3 motor pensylvania vehicle prone to ground problems because of rust its more likely the sending unit resistor ...

...2000 Chevy Blazer 2 WD , 4.3 liter and have no electrical power in car. I changed my multifunction switch on 2000 Chevy Blazer, now when turn the key to on position I'm getting no electricity at all, ...

chevy blazer, fuses inside and underhood have power,even power to headlight bulb, was told I have a ground problem I have checked for broken wires loose grounds all other lights work turn signals park

2000 Chevy Blazer 4.3 4WD 2DR brake lights on drivers side not functioning fuse is good, new bulbs, new sockets, same problem Check to make sure you have a good ground. From there, you need a circuit ...