Questions & Answers for: 2000 blazer service 4wd

...service 4wd light comes on, on a blazer it is usually one of two things, either the solenoid on the transfer case, or more times than not it is the switch on the dash itself, they were not a good ...

...2000 Blazer for 6 years now I would say return the vehicle if you can and run the other way. Blazers are VERY poor in consumer reports and I average spending almost 1000 every 2-3 months. Oil cooler ...

2000 chevy s10 blazer My 4wd light keeps blinking off and on and wont keep a steady light, I dont think that it is working the manual that came with the blazer says that the gears need to be adjusted,

...2000 chevy blazer it is engaged in 4WD right now and I can't get it to shift into 2HI,4HI,or 4LO just wondering is there any way of checking the module in the kick panel on the passengers side or is ...

...2000 Chevrolet Blazer is stuck in 4low. Today my "service 4wd" lit up on my dash. I asked a friend to check it out really quick. He tried putting the car into auto 4wd with my push button switch over ...

...4x4 light on a chevy blazer year 2000 you don't reset the light it means their is an electronic problem with the 4wd system, which will need to be diagnosed at a dealer or experienced mechanic ...

Service 4WD Light is on and the transmission seems to be stuck in 4LO. What may be the problem they work off a vacum so i would check that first before you get into anything hard you might find a wire

...2000 Chev Blazer, the service 4WD light appears now and then , we never use 4WD so was not worried about it until today i tryed to put into 4WD and it would not work the lights on the buttons would ...

...service 4wd light is on dont know where to start at diagnosing...service abs light is on as well Problem is in electrical control. 1. check computer codes.(turn ignition 1 click ON/OFF) do this 3 ...

2000 chev blazer lt 4wd 4button dash switch service 4wd warning light is on when i try to put it in to 4wd button blinks it tries to engage but doesnt then 2wd button lights back up what is wrong? ...