Questions & Answers for: 2000 acura integra gsr

...rpm. If i engage the clutch slowley its fine but if i give it gas at a fasr rate and relese the clutch it acts like it wants to stall? 2000 integra gsr check the distributor cap and rotor for ...

Ad

...2000 acura gsr,first off thanks for the help trying to solve my problem.it was an easy,but overlooked problem.when it started i had put new plugs,wires,cap,rotor,fuel filter and air filter on from ...

Ad

Question about 1996 TL Series

1 Answer

...2000 ACURA INTEGRA GSR TO CHANGE FRONT BRAKE ROTORS. FIRST YOU NEED TO SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.MAKE SURE VECHICLE PARKED ON LEVEL SOLID GROUND.YOU NEED TO REMOVE BRAKE CALIPER ...

Question about 2000 Integra

1 Answer

...2000 Integra gsr i have change the altnater and change like three batteries. check all the wires in they all good just wandering whats wrong Could be your ignition switch. It's mounted inside the ...

2000 acura integra gsr So I'm having a problem with my clutch, the clutch worked just fine until I took off the steel line from the slave cylinder I thought it was leaking metal on metal when pressed ...

2000 Honda Civic with B18B1 and GSR transmission. The engine and Tran are from an Acura Integra. I'm stuck in limp mode at 4000Rpm check your fluid transmission or your clutch pack worn out and try to

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...