Questions & Answers for: side jenn air cooktop work

Jenn-Air exhaust fan comes on every time the left two burners are turned on. It seems to work fine with right two burners. What's up with that? The left side is set for your grill. There is apparently

...side of house. Just bought a new Jenn air downdraft and vent is facing back. How can it be turned so it's facing down. How do you get the inside area of the vent clean from the grease and oils where ...

...jenn air and the broiler burned up and i replaced the element and now the oven does not heat neither does the broiler Are you sure the breaker didn't trip on one side? If one leg of the 220 is out, ...

...jenn air cooktop jed8430adb so I took it apart, while it was running, to disconnect the switch and accidently touched conduit from the switch to metal on the side resulting in sparks and the whole ...

...jenn air cooktop jed8430adb so I took it apart, while it was running, to disconnect the switch and accidently touched conduit from the switch to metal on the side resulting in sparks and the whole ...

Jenn Air ((877) 232-6771) and give them your model number (serial is helpful too). They sent my replacement glass within a week. I have a model JED8430ABD from 2000 and they had the top. Fit perfectly

...comes on when burner is turned on and won't respond to independent switch. Typically the Jenn-Air has a grill on the left hand side and the fan is suppose to come on when that burner is turned

...side on my electric cooktop doesnt seem to heat up very well. I have had the installer look at the appliance and was told "that is as hot as it get" I have had two other cooktops in the past and have ...

...jenn air outdoor cooktop. The right side didnt work so we took apart and blew circut breaker. Now we are trying to re wire but dont know where the green ( ground) connects. Canyou please help? Hi, ...

...Jenn-Air electric range (model no. D156B) with down draft, approx. 15 years old. I wanted to acquire a new burner cartridge to replace a old griddle cartridge and add more burners. When I finally ...