Questions & Answers for: 1999 mercury sable thermostat replacement

no heat have replaced thermostat and had radiator flushed if engine temp is normal after running awhile. i would try to flush the heater core.(disconnecting the heater hoses from engine and flushing ...

...1999 Mercury Sable heater problem. I guess our car is a '98, not '99. In any case, my husband has been through the ringer on this repair. He has replaced the gasket and thermostat. He has used a ...

...1999 Mercury Sable is running hot occasionally and the serpentine belt keeps shredding within 30 min. of getting a new one put on. I have bought a new belt tensioner as well as a new Idler pulley and ...

...1999 Sable I have replaced the thermostat, flushed the system several times a year, replaced water pump, head gaskets and cleaned the engine completely. Still no heat at all, getting ready to replace ...

...1999 mercury sable dohc? Here ya go! 3.0L DOHC VIN S Engine CAUTION NEVER open, service or drain the radiator or cooling system when hot; serious burns can occur from the steam and hot coolant. Also, ...

...sable replaced thermostat and housing freeze plugs heater core radiator head gaskets and heads... still over heats going up hills and heater not working. heater cores is probly pluged take a garden ...

where is the therostat located on my car You either have the 3.0 V-6 or the 24 valve V-6...you can locate the thermostat by tracing the upper radiator hose that runs from the radiator to the engine ...

Mercury Sable (1999) overheats when I run the air conditioner. My mechanic has replaced the thermostat, serpintine belt, radiator reservoir and the head gasket. I just got it back from the shop and it

my 1999 mercury sable overheats after i replaced the thermostat , cap & flushed coolant what could it be? low coolant light comes on after filled with coolant maybe there is air in the cicuit

...1999 Mercury Sable that is over heating, losing water and the serpentine belt is not turning belt tensioner is seazed or a pulley is seazed so belt wont turn or belt needs replacement as groves are ...