...1999 gmc sierra 1500 sle 4x4 auto 4.8 short cab long bed....shifting into reverse and it sqeals and goes nowhere, reverse lights work the tranny just feels like its slipping and it can go into drive ...
...1999 GMC Suburban 1500 with the 2wd and the 4l60 E transmission never seems to shift into 3rd gear. In drive it doesnt want to shift into 2nd and just slips out of gear at about 30mph. If I place the ...
...GMC suburban.It will only move in reverse then put it in drive it will move about two feet then stopthere is a small hole which not sure if its the transfer case or not but you can see a chain like a ...
blinker fuse blows,when truck shifts in to reverse on my 99 suburban You may have a short back at the reverse light location.
no reverse,will not shift out of first unless you lift throttle then it runs out fine. its a 97 4x4 it will have to be rebuilt or replaced if the reverse gear is out then its time for a rebuild
...1999 K2500 CHEVY SUBURBAN-NEW NEUTRAL SAFETY SWITCH,FUSES GOOD,BULBS GOOD move the gear selector back and forth between neutral and reverse, but not all the way. have the same problem u could have ...
...1999 gmc suburban 1500 with a 5.7 motor and an automatic transmission. when my suburban is in 2 hi, i can sometimes put it into reverse and it will not move but make a grinding noise. then i can put ...
...GMC SUBURBAN AND IF I PUT IT IN DRIVE IT MAKES A GRINDING NOISE AND WONT MOVE AND IF I PUT IN REVERSE IT MAKES NO NOISE BUT U CAN DRIVE IT WHAT IS THAT Broken wedged break pad? Wheel bearing? Try ...
1999 GMC suburban and just out of the blue the transmission started to make a grinding noise mind you this is a 4wd unit it still will go but acts like it stuck in low gear and no reverse I tried ...
reverse lights on my 99 suburban will not come on. if the bulbs are good it will be a fault in the neutral safety switch, it controls backup lights and starter safety
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions