1999 5.3L V8 Chevy Z71 with an automatic push-button 4 wheel drive. Pressing the 4 Hi button or 4 Lo you can feel the unit trying to engage the 4 wheel drive but no engagement happens. The 4 Hi button
4 wheel drive light flashes 6 times and didindages itself how to fix a 4 wheel drive ona 1999 ford explorer
1999 ford explorer pulls to right when put into 4 wheel drive during a recent snow, i switched to 4 wheel drive, and car started pulling to the right. when i switched back to 2 wheel drive , it was ok
1999 explorer in 4-high on slippery road there is clunking 1999 explorer in 4-high on slippery road there is loud clunk from wheels when driving check the U-joints and the front axle joints
1999 explorer in 4-high on slippery road there is clunking This was my original question. powernut suggest I check the U-joints and the front axle joints. I checked them and they are fine. Another ...
...4 wheel drive by my 2006 ford f250 pops in and out of 4 wheel drive by it self when i put it in 4 wheel it only stays in 4 wheel for about a minute before it pops out and into 2 wheel drive if the ...
...Ford Explorer with a 4.6 engine with the auto 4 wheel drive electric push button system (4x4 auto / 4x4 high / 4x4 low). When running in 4x4 auto (normal running mode), making hard turns the front ...
explorer 4 wheel drive remove the wheel, and brake rotor as well as the calipur. behind the hub where the axel goes in, there will be some bolts , remove them, and then push the axel back in it as far
4 wheel drive on a 1999 navagator? Hi, frist of all is it all time four wheel drive,if it is all time the answer is no. but if you have to put it in four wheel drive , just pull the axels out of front
...1999 Ford Explorer Limited with all time four wheel drive. Can it be converted to a two wheel rear drive configuration? Simplest way is to remove your driveline that goes to the front axle from the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions