Questions & Answers for: 1999 dodge durango trans filter

...1999 dodge 64,000 miles on truck. noise gets worse when put in gear. no fluid leaking.level is full sounds like inspection cover to trans hitting flexplate don't know why anyone would need to ...

...dodge durango 2000 ,V8 5.9L 4x4 - 175,00miles PO753 code on a Durango can also be caused by a bad transmision relay in the relay -fuse block behind the battery in the engine compartment. (relay # 31 ...

...1999 Dodge Durango I need to torque specs for the head bolts and the intake on a 1999 Dodge Durango with a 318. Thank you!! Head Torque sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 ...

...dodge durango head bolts & intake bo manual gives in. lbs,what is the equal in foot lbs.,i do not have a in. lb.torque wrench Here's a link to a conversion ...

1999 durango 5.2 4wd -transmission does nothing 1999 durango 5.2 4wd -transmission does nothing torque converter ok fluid level ok need info on sensors, relays,fuses, selanoids from what i gather the ...

1999 dodge durango inside the gearbox This is a messy job! Must have a drain pan, you need to remove lower fluid pan and you'll find the filter attached to the bottom of the transmission. Perform this

1999 dodge durango ticking from flywheel or torque converter i have a 99 durango i recently installed a new motor after about a month of driving i hear a whiring noise when i first start that goes ...

what is the torque for transmission pan bolts for 1999 dodge durango the torque on the pan both will be a hundred and five inch pounds

1999 dodge durango 4x4 5.9 only goes into O/D when cold and if I get into O/D, it kicks down to 3rd . replaced TCM, trans filter when I replaced both transducer and solenoid. how do get O/D? Did you ...

Dodge Durango 46 Re is the transmission The torque specs for the flex plate on a 5.9 V8 Dodge Durango with a 46RE transmission is 25 foot pounds. It is important to note that a thread locker should be