Questions & Answers for: 1998 s10 truck clutch start

...1998 s10 2.2 truck will not start After turning the ignition key to start the truck....nothing happens....it behaves the same way as if I tried to start it without pressing the clutch pedal. My wife ...

...1998 Chevy S10 pick up, have a starting problem. Just all at once would not work. Checked the battery, was good, checked voltage at starter was a good 12 1/2 volts, checked the clutch swith-was good, ...

1998 s10 If the battery cable is dead at the starter, check the connections. It could be corroded inside the plastic cover. If the small wire at the starter is dead with the key in the start position,

s10 turns over but will not fire after changing clutch I can't imagine what could cause the engine not to start by just pulling the transmission out. Are you getting spark to the plugs and fuel to the

...s10 manual transmission wont wont rotate when attempting to start but will start when i slam it in to 2nd gear and ideas? Your starter safety switch is likely to be bad. It is located on the firewall ...

S10 will simply not start. It will start 97 times out of 100. Someone said it was probably the clutch starter safety switch. Well, I bought one, but am not sure how to install it. The clutch switch is

...1998 Chevrolet s10 truck? Just unplug the clutch pedal switch and install a jumper in the plug to compete the start circuit. Safety concerning run away is possible when doing this. make sure ...