Questions & Answers for: 1998 mercury sable problems

Question about Car Audio & Video

1 Answer

1998 Mercury Sable CD Changer My CD Changer in my 1998 Mercury Sable has a troubleshoot code...CDE1, what does that mean? It changes cd's but says its bad. Need help to solve this problem. How does ...

Ad

Question about 1998 Sable

1 Answer

...1998 mercury sable gets very loud when it gets up to 30-40 mph and supposly the exhaust pipes are sealed properly? check all the engine and trans mounts this is a common problem when you have bromen ...

Ad

Question about 1998 Sable

1 Answer

...will not go off. no air blows through the vents to produced heat or AC,it is not the EGR . What else could it be? 1998 mercury sable Is the radiator fan working? Sounds like you have a major

...1998 mercury sable dont work i put a fuse in it that was blown but that didnt fix the problem im not getting anything when i turn the nobs on Well there could be a problem with the switch itself or ...

brake pedal pulsates when breaking on my 1998 Mercury Sable. ABS disconnected at this time. 93000 miles. your brake rotors need resurfacing or replacing them that the problem good luck.

...and fuse on 1998 mercury sable its under the hood on driver side what the problem not starting check the trunk area for the fuel cut off switch poss bad or tripped did u get hit or someone bump ur ...

...1998 Mercury Sable will idle around 2500 rpm after it is warmed up and has been driven for awhile, It is more common in the summer than in the winter. sounds like it needs a good service . the air ...

...1998 mercury sable shakes when i drive. Engine lights are flashing. just had trans fixed. Take it back they need to do computer diag. to see if they left some thing loose or you can go to any auto ...

...1998 mercury sable won't come out of park but my 1998 mercury sable won't come out of park but the actual shifter moves freely but not catching the gears? That happen to me, and A guy helped ...

solutions for code p1131 problems mercury sable 1998 The code is for the upstream O2 sensor bank one stuck on lean.  Could be a faulty sensor, or low fuel pressure, or a vac leak.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Car Audio & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...