Questions & Answers for: 1998 lumina replacing check engine

...1998 lumina won't pass inspection what to do? I assume everything else is working fine?? Remove the negative battery cable for about a minute. Turn the key on, don't start the car, leave it on for ...

...1998 chevy lumina ltz I've replaced the bulb cause both burned out at the same time. but now all three brake lights are not working . i've checked the fuses they are fine. i replaced one of the brake ...

1998 lumina engine light keeps coming on but i dont know why. it goes off sometimes but then keeps coming back on. any solutions? Since the check engine light does not specify what the problem is a ...

...my 1995 Lumina. I get around it by just pulling back on the turn signal lever when I hit the brakes. Other wise you have to replace the switch. there are solutions posted on the internet. check ...

...for signs of corrosion. If you find corrosion, clean connections. 3rd check brake light switch (aka stop light switch)located on upper brake pedal, it has an electric plug in wire connected to

1998 Chevy Lumina has check Engine light on and code says egr valve which has been replaced now what Check engine lights sometimes do not go off right away. To reset the check engine light, disconnect

...1998 lumina the brakes lights are not working is it the fuse or the light bulb Your problem is most likely your turn signal canceler. It is in your sterring colum. The best way to tell is if you have ...

1998 chevy lumina: rear window brake light not working, left brake light not working, rear left turn signal not working See if bulbs have burnt out in the left brake light and rear turn signal (one ...

...1998 Lumina Sedan. My two lower brake lights are not working when the brake is applied. All other lights are working properly except (1) front marker lamp. I have gotten the brake lights to work ...

The tail lights dont work for a 98 chevy lumina check the obvious first(fuse), if ok, check for power, check bulbs...