what size gap does a 1998 ford ranger spark plug need to be? 4.0L = 0.052-0.056 3.0L = 0.052-0.056 2.5L = 0.042-0.046 .044. It is listed under the hood in front of radiator next to vacuum chart.
1998 ford ranger, number 3 cylinder mis fires. 1998 ford ranger, number 3 cylinder misfires. change spark plug, and it runs find for a while then starts misfire again. I would think its in the coil ...
1998 Ford Ranger, 3.0L. I changed the spark 1998 Ford Ranger, 3.0L. I changed the spark plugs, wires and coil and it still misses really bad. What else could be wrong? I have also change the EGR Valve
what is the spark plug gap setting for a 1998, 4 cylinder Ford Ranger it realy wont bother the car to much what you set it at but go for a gap of 18 to 25 th of an inch
Can you tell me the spark plug gap for 1998 ford ranger 6 cylender 4.0 .054 (In thousandths of an inch)
1998 ford ranger replaced spark plug,coil pack,fuel injector check engein light on misfire cylinder 6 sounds like plug wire....
1998 ford ranger 4x4 4.0 six cylinder engine Gap needed for spark plugs on ford ranger 1998 4x4 4.0 engine plug gap should be .045". if you look under the hood somewhere you might still have the decal
Question about 1998 Ranger
1998 ford ranger 2.5 truck will not stay running we change crank sensor and timing belt truck has spark Have you tested fuel pressure using a test gauge? Are the timing marks aligned right ? Did it ...
1998 ford ranger look on google https://www.google.com/search?q=1998+ford+ranger+spark+plug+wire+diagram&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwja2_TYi6jWAhVJ5yYKHcSaCxkQsAQIJQ
...plug gap for your 1998 Ford Ranger 2.5L with 8 plugs depends on the specific spark plugs you're using. Here are some recommended gap values: Champion RC8PCY: Gap of 0.8mm. NGK PFR6B-II: Gap of
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions