Questions & Answers for: 1997 subaru legacy knock sensor

...1997 subaru outback with regular 2.5 engine stand at the front drivers tire, Peer over just below where the throtle cables connect onto the side of the throtle body, Now look straight down. It's that ...

1997 Subaru Legacy GT 2.5L I have the check engine light on speradically. The car doesn't seem to drive much different when it is on, then when it turns off. Any idea what this could be? Check the ...

...legacy and just had a diagnostic done and mine is bad. If there is no knock sensor why would it say it was bad and why does Auto Zone, Advanced Auto and my local Subaru dealer sell them. Mine is ...

...Subaru Legacy. I've ordered the part, just need to know where to find instructions on changing this sensor and where exactly it is located on the engine. It's a 1998 Subaru Legacy GT 2.5L sensor are ...

...1997 subaru outback legacy getting a p0400 code replaced the egr valve, now getting a p0400 and a p0325 knock sensor code, what to do? There is a tube that connects to the EGR valve that gets blocked ...

1997 subaru legacy outback knock sensor location Hiya, Here you go: 2.5L EngineTo Remove: Disconnect the battery ground cable. Remove the air cleaner housing. Vehicles with 5-spd transmission: Remove ...

subaru 1997 outback legacy 2.5 engine and it seems to not be correct. The ignition timing is not adjustable. It is computer controlled by the crank sensor, cam sensor and knock sensor. Would be easier

subaru legacy outback The knock sensor is located on the top of the engine block almost hidden from view by the intake manifold. It is almost directly below the spot where your throttle cable connects

...knock sensor in a 1996 subaru gtb wagon engine It is underneath the intake manifold. If you look straight down from the throttle body, you will see a sensor with one wire coming out and a bolt going ...

...subaru legacy ,replace knock sensor we put a standard engine in an automatic ,where is the knock sensor and how do I replace it? if the engine has a knock sensor it is attached to the block between ...