Questions & Answers for: 1997 saturn window regulator outer

...& then remove the outer part.Then lift door handle up & slide forward.It shoukld come off.1996-1999 Sedan the regulator can be removed with just the inner door trim removed.hope this ...

...window motor/regulator... Got inner door panel off, outer door skin bolts out, but don't know how to take off the outer door handle so the door skin can come off. Not very mechanically inclined (yet) ...

...window regulator on a 1996 saturn you do need to remove the exterior door which is connected by about ten lock screws around the inside of the door. you also need to remove the side view mirror and ...

...1997 Saturn SL1?The window was smashed, and I need to replace it. Thank you so much for your time and help! Saturn Coupes/Sedans/Wagons 1991-1998 Repair Guide Door Glass and Regulator - REMOVAL & ...

...saturn sl1, the electric window does not work anymore on drivers door, the other three windows still work. The switch is in the middle between the two front seats. is this a major issue or do i just ...

...outer door handle and the window molding piece, and the outer door panel will come off. I would try spraying some WD-40 into the lock mechanism and with a screwdriver try to pry on it and operate the ...

Saturn 1997 SL1's window ragulatior or motor is not working. The window will not go up. How do I get the ragulator out ? You'll need to remove the outer door panel. There are torx head bit bolts going

window regulator is broken. There are several screws that hold the outside door skin on your vehicle. If you remove all of these screws and disconnect the outside door handle, you can remove the outer

...panel the outer panel will come off after you remove the mirror and you will have full access to the window regulator you need a small set of torx sockets ( 7.99 harbor freight) or $10.00 at ...

...window regulator or the window motor. The outer panel is held in place with a dozen or so bolts that a male torx socket is needed to remove. You will first remove the trim piece that is on the upper ...