Questions & Answers for: 1997 10 engaging 4 wheel

...a 1997 dodge ram that makes a clunking noise when I make a right turn. It only makes the noise when the truck is in motion. you more than likely need new U-joints, im assuming its

...drive and shift out of 4 to 2 it will jump. If I stop and shift out of 4 wheel drive no noticable jolt or noise. usually the noise in the front end is the u-joints or cv joints out towards the

...this. Its electronically controlled 4x4(push button) i would start cheap and replace that switch when engaging 4 wheel drive on 2001 Iszuz rodeo it makes a clunking noise. What could this possibly

4 wheel does the same as part time in jeeps, it engages only when the vehicle loses traction. when auto 4 wheel is on the truck isn't fully in 4 wheel drive. my 02 sierra makes the clunk noise too but

...a clunking noise like something did not engage. sounds like it is from the front end other times from the rear.4-wheel drive works,just the noise. Have you checked the u-joints in the

4 wheel drive check front axle shafts cv joints one might be bad. also if you turn on a dry surface when 4x4 engaged it will bind and make noise. Jack front of truck up and try to wiggle wheel up,down

1997 toyota rav 4 that makes a clunking noise whenever I turn the wheel. What is it? Hi Is it a clunk clunk clunk noise? Then you have a CV joint that needs to be replaced. This is called the CONSTANT

4-wheel-drive-system-will-not-disengage.html ---------- 4WD light is flashing and beeping? NO 4WD high? http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html ---------

...this is hands on deal., get a real mech to do this, can be great danger driving and the finding too. get help. wild guess> of 10 bad CVS what wheel clunks, there are 5, 4 wheels and steering

...4 The four wheel drive still works but has a continual clunking when engaged. It is a push button setup with a vertical ladder.The noise is a little quieter when in automatic 4 wheel and louder when ...