Questions & Answers for: 1996 tracker timing

...1996 Geo tracker I had to replace the water pump on my tracker. This interesting design require you remove the timing belt tensioner. some during the process my cam must have moved because my vehicle ...

...tracker setting base ignition timing is there a connector to unplug or what gee , try my ign page. you need to place a jumper to freeze the Ignition timing. 1 static timiing. 2; dynamic timing ...

...1996 Geo Truck Tracker 2WD 1.6L MFI SOHC 4cyl Fig.: Before installing the timing belt, position the camshaft sprocket (1) so that the timing mark on the sprocket (2) is aligned with the notch (3) on ...

...1996 geo tracker 16 valve rebuilt a 1990 i have a 1996 geo tracker 16 valve i rebuilt a 1990 block 8 valve, installed new piston/ rings used 1996 parts with intake getting gas and spark just turns ...

1996 chevy geo tracker, the problem i have is that, when i put on drive, it only goes up to 10 to 15 max speed. i'm assuming it's the transmission problem yep it sounds like it is stuck in first gear.

1996 geo tracker leaking oil at bottom of timing chain cover change crank seal ASAP need your email for full writeup

...1996 geo tracker won't stay in 4wheel high it wont on pavement, only dirt. and will will be ok on ice, snow, dirt, grass. but not hard pavement its not and AWD car, it is 4wd, 4wd part time. the part ...

i need to locate the fuel pump fuse on a 1990 geo tracker 1.6 whear is the fuel pump fues located seems you asked this 3 times now., old posts. there is no dedicated fuse. here. sorry, ! its ...

Timing marks 1.6 liter 1996 Changing timing belt and replacing distributer they timing here (both are there and full FSM 96) http://www.fixkick.com/

...my timing belt running off pullies 95 geo tracker we have that. covered,. all ways but sunday. its not aligned, buy why , is it not. 1 page dedicated to drive. ...