Questions & Answers for: 1996 suburban crank sensor replacement

Question about 1996 Suburban

1 Answer

1996 GMC Suburban will not start. I have a 96 suburban.5.7 Vortex. I have good spark, fuel pressure, and compression. I replaced everything I can think of. Timing is dead center. Computer diagnose ...

Ad

1996 Chevy Suburban C1500 V8 5.7 suddenly died while slowing to make a turn. Will not re-fire. Code P1345 cam/crank correlation error shown. Checked wiring harness for each per Chilton, both OK. ...

Ad

Question about 1996 Suburban

2 Answers

...crank sensor no luck See what you are missing. Fuel or spark. This will cut the condition in half. try spraying a little air intake cleaner into throttle body while cranking (to check for a possible ...

Question about 1996 Suburban

2 Answers

have had two no sparks after swapping engines, and it was the crankshaft position sensor. Is this a distrubutorless engine? If so the coil pack could be at fault with no spark and new pick up on crank

...readings from other sensors such as the Cam position sensor and the crank position sensor but if the timing belt wasn't set correctly to begin with that won't be able to make the adjustments

Question about 1996 Suburban

1 Answer

...suburban and it want start just turns over, so I replaced the fuel pump and still nuthing, someone said cam sensor, but what about a crank sensor? How can I tell with no engine light on for a code? ...

1996 suburban wont start. If you inject a starter fluid it will start. I have replaced the fuel pump. I have checked the that fuel is pumping but did not use a meter. What is next? if the engine will ...

suburban. the truck is running very strong. havent seen power from it like this in years. I ran a can of seafoam in the gas tank to try and stop the misfire in cylinder 6. it idles smooth in park, but

Question about 1996 Suburban

1 Answer

1996 k2500 suburban 7.4ltr. Running great. All of a sudden sounds like a dead miss. exhaust is getting very hot at high rpm running exhaust is not restricted though. No codes on scanner, o2 sensor ...

Question about 1993 Suburban

1 Answer

...suburban Chain Print REMOVAL & INSTALLATION4.3L, 5.0L, 5.7L and 7.4L Engines See Figures 1, 2, 3, 4, 5 and 6 Remove the timing cover. This will allow access to the timing chain. Crank the engine ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...