...gmc sierra brake lights my third brake light works but i have no rear brake lights but ido have turn signals.i have replaced the multi function switch and checked the fuses New starter---so car turns ...
...change in October and brake fluid full at that time, could it have leaked out when being worked on or is it a brake problem. the red brake light can come on for several different reasons, one is if ...
1996 GMC Yukon - multiple issues :-( Hello...I'm hoping someone may be able to give me some clues on where to start to fix my car. I have a list of issues. Here goes: 1. Car wouldn't start...we'd ...
...are applied. Did you try just changing the bulbs? If its not the bulbs I would have to say check the brake light switch at the pedal, it is a different switch than the cruise control cut out
...1996 gmc sierra brake asembly my brake lights don't work. My turn signals do. And fuses are ok What is wrong? The brake light switch is at fault. Get a new one and replace it. The location is at the ...
...brake lights, I think it is the multi switch. Am i right and if so how would i change it? Yes you are pretty much correct. It depends on if your vehicle is a standerd or automatic.Standerd the switch ...
...1996 GMC yukon Check my fuse they are all good change out the brake switch. You will need a new tail light circuit board these are known for getting to hot.And i would get it from GM because the ...
1996 GMC SIERRA XC 4x4 wont even turn over Battery Good, Alternator Good. Starter Good. Turn key over and everything sounds good until you try to crank it and it does this clicking sound. And for as ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions