Question about 1996 Ram 1500 Club Cab
1996 Dodge Ram 1500 kept stalling while driving now won't start Our 1996 Dodge Ram 1500 kept stalling while driving but would start right back up. Did this about once a week or so until it stalled ...
1996 Dodge 1500 died while driving, no power to coil No power to coil, no error codes able to be read, tested wiring harness with continuity tester, was fine, any suggestions? the auto shut down relay
1996 1500 ram wont start i replaced cam sensor and coil still no spark comming out of coil, i cranks over fine just dont start there is also a crank sensor that can keep it from sparking. are you ...
...cam sensor on a new 5.2 engine in a 1998 Dodge Durango. We checked and rechecked the connections and still no spark. check the wiring harness at the coil,sometimes that plug will get loose or dirty ...
1996 Dodge B2500 5.2L. Engine misses on heavy acceleration. Recently replaced fuel pump, tps, cap,rotor, plugs and wires. Can a MAP sensor cause a mis-problem? Yes a Manifold sensor can cause this ...
...dodge ram 1500 have a cam or crank censor? I am needing to know if a Dodge Ram 1500 has a cam or crank censor? If it does where can I find it? The 3.9L 5.2L and 5.9L engine use the distributor ...
...1996 dodge pickup with a 5.2L engine? The Engine Control Unit continuously receives information from sensors on the cam and crank shafts. This code indicates that there was an intermittent loss of ...
...1996 Dodge Ram 1500 360cu 5.9l automatic trans. 2WD they put it on thier obd and it defines my problem as CMP or CKP signal intermittent condition. Explanation ECM detected the actual CMP position ...
1996 dodge ram 5.9 wheres the cam sensor at search it
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions