Questions & Answers for: 1996 1500 cam sensor code

Question about 1996 Astro

1 Answer

1996 chevrolet suburban 1500 I had a crank sensor code, crank and cam not matching. Then came out and would not start. Ran the battery down, changed the crank sensor, had to buy new battery, still won

Ad

1996 Dodge Ram 1500 kept stalling while driving now won't start Our 1996 Dodge Ram 1500 kept stalling while driving but would start right back up. Did this about once a week or so until it stalled ...

Ad

1996 Dodge 1500 died while driving, no power to coil No power to coil, no error codes able to be read, tested wiring harness with continuity tester, was fine, any suggestions? the auto shut down relay

Question about 1996 Ram 1500 Club Cab

1 Answer

...sensor and cam sensor on a new 5.2 engine in a 1998 Dodge Durango. We checked and rechecked the connections and still no spark. check the wiring harness at the coil,sometimes that plug will get loose ...

1996 Chevy Express 1500 w/5.0 bogging only when warm. I have a 1996 Chevy Express 1500 conversion van with a 5.0 vortech equipped. When cold (first start of the day or after sitting long enough to ...

Question about 1996 K1500

1 Answer

...1500 4x4 with vortec motor set timing on 96 gmc with out cam and crank sensor code coming on put in rebuilt motor with small modified cam 480 lift and 258 duration Timing is not adjustable. You do ...

Question about 1996 Ram 1500 Club Cab

1 Answer

cam sensor, in a 96 5.2L does that refer to the pick up in the distributor or is there a seperate sensor for the cam. I know there is a crank position sensor on the engine but i have also been tricked

Question about 1996 Ram 1500 Club Cab

1 Answer

...1996 dodge pickup with a 5.2L engine? The Engine Control Unit continuously receives information from sensors on the cam and crank shafts. This code indicates that there was an intermittent loss of ...

Question about 1996 Ram 1500 Club Cab

1 Answer

...1996 Dodge Ram 1500 360cu 5.9l automatic trans. 2WD they put it on thier obd and it defines my problem as CMP or CKP signal intermittent condition. Explanation ECM detected the actual CMP position ...

...1996 Jeep is quitting at random would it be cam sensor or possible crank sensor It quits at random and starts right up in 30 second when it as run less than 30 minutes then its fine. nothing shows on ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...