Questions & Answers for: 1994 chevrolet silverado 1500 hoping

...Chevrolet K2500 4 Wheel Drive. I recently had a new motor installed. The speedometer started to fluctuate about 3 days after getting it back. At 45 mph it will peg out at 80 mph and return to speed. ...

Chevrolet Silverado 1500 4WD engaged at high speed My wife drove my 1500 4WD Chevrolet Silverado in excess of 45 MPH while the 4LO (down arrow) was engaged. She drove my truck all day. I haven't had a

...Chevrolet,Silverado, 4x4,2.3 Litre,V-8. Good/Quick start up,no engine miss. However, when running throttle, driving down the road,the engine will shudder,as if there is a dead miss,or the fuel is ...

...silverado bounces at 45 mph and when you brake at 45 it bounces at 45 and when i hit the brakes at 45- replaced the front brakes but i think it maybe the drums You can assess this by carefully ...

...silverado 4.8 and when i reach about 45 mph it sort of bogs down and wont gain speed as easily, and the exhaust seems to get quieter. And when going up hills I have to almost punch it to make it go. ...

...Silverado Classic has a humming noise and vibration at 45-50 mph abouve 50 or below 45 it is not heard or felt. The shop told me it was the exhaust housing causing the noise. That somehow seems way ...

...Silverado 1500. at first it drove fine, but Ive noticed lately that the rear (disk) brakes are dragging and causing excessive heat. There is a noticable shimmy at about 45-55 mph. and even more ...

1994 Chevy suburban 4x4 had rear end done and when driving at speed 30 mph makes noise when it comes to slow down pinion depth was not set properly when the rear end was done, take it back where you ...

Silverado, 2500HD Duramax with Allison. I am getting a loud roaring noise and vibration at 45 -50 MPH then again at 65-70 MPH under load. Goes away when I release the accelerat I have a 2003 Silverado

...my front end between 40-45 mph. I can make it stop by slowing down or speeding through that speed If there are no issues with the tires (slipped belt etc.) the most likely cause is worn tie rod