...buick lesabre How hard is it and how do I replace the high speed blower relay under the hood on the firewall? Does it just unplug? i haver a 85 buick lesaber it cuts out when i start it or should i ...
...1994 buick lesare vents don't want to work all the time. i turn vent on it just comes out of defrost. i can be going down road and it will start coming out of the vents. the ac works same way. it ...
LeSabre blower runs on all speed except high. My mechanic thinks it might be the blower resistor, but I thought that made it run ONLY on high. May need a high blower relay. Under fan motor on firewall
1994 buick lesabre. All of the relays are the same part number except two of them and they are next to one another with two fuse blocks just above. These are all under the hood up against the firewall
...it on a 1994 Buick LaSabre or the Relay. look in the engine compartment. If you have a relay center on the firewall (located under the windshield), the relay will be there. It is on the bottom
...relay on the firewall under a plastic shrould that send the elect to the compressor. it should be one of the first two that are on the far left on the passenger side ..I had this same prob. one relay ...
...relay is behind the cover on the firewall,turn the ignition on,and it will click,and you will find it,the fuel pressure regulator is on the fuel rail.On the intake.Rate please if this was helpful. ...
...Buick lesabre, new blower motor and new control module. Blower stays on even with key out of ignition. What could be the issue? Relay or control module? The only way for the blower to still get power ...
...firewall, that might be a bad relay. You should be able to find the click by ear and by feel. Be sure and check your battery connections for tightness, the battery ground, and the starter ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions