Questions & Answers for: 1991 geo metro manual

geo metro a/t someties i have reverse and sometimes nothing at the time reverse doesnt work trans shift problem 1st to 2nd upshift no manual downshift to secound let off accelerator when starting from

...1991 Geo Metro hatch back I need to replace the rear struts on my 1991 GEO Metro hatch back. Is this a DIY job? If so, does any one know of any online resources such as, a manual, a walk through, ...

...geo lsi It should be the same place as a 1991 Metro, on the back side of the transaxle there is a plug that takes a 15/16 wrench to remove. the plug faces the drivers side tire. If oil drips out when ...

1991 Metro does not always start. Recently purchased 1991 Metro 1 Liter Manual transmission, 200000 miles. Always starts cold. When hot it sometimes does not always start- engine and starter do not ...

alignment marks on cam and crank gear alignment 1991 geo metro 1L engine public library...Chilton or Haynes auto repair manuals or collisionrepairadvice.com

My geo 1.0 has 90 lbs compresion .Is that good?and does any body know what the compression was at new condition? go too auto zone and check the manual too see what it should be!!!

...1991 geo metro with 3 cyl motor and manual trans. Is there a relay or some thing i should check any help is useful Try checking the timing belt. They will cause this issue if they are even slightly ...

...geo metro manual trans only you can park start engine, warm it up, and at normal hot 14psi coolant pressure, see the exact leak point, not me or anyone here can. its an EYEs on thing, the object ...

1991 Geo Metro 3 cylinder if it has a DIP STICK to check it thru that small tube . if not then you need to take it to a transmission shop or dealer and have it done didnt say if you have the manual or

...geo metro automatic transmisson goes to the tranny to the radiator there are 2 hoses,(pair) it's a trans cooler inside the rad. there is no correct order. it's not polarized in any way. its just a ...