Questions & Answers for: 1991 ford ranger check engine

Question about 1991 Ranger Supercab

1 Answer

Ford Ranger 4 cyl 5 speed. Can`t find clutch slave cyl. bleeder. Internal slave. Hard at times to get into 1st and rev. Also can`t find connector to hook up tester for check engine light on. first the

Ad

...Ranger auto Trans down shifts when cruising, with very slight accelerator pressure. The check engine light stays on, could this be causing the problem, or some thing else? since the trans is ...

Ad

Question about 1991 Ranger Supercab

2 Answers

...1991 Ford Ranger Clutch Problem. My 1991 Ford Ranger will not start. I am not sure if the clutch is shot or if there is air in the hydraulic line. I aslo don't know how to check either. Any ideas?? ...

ranger idols fine you can rev engine.but as soon as you take off in a few seconds it starts to shake and die. this sounds like it is not getting enough fuel to engine. change fuel filter, and check to

Question about 1991 Ranger Supercab

1 Answer

Lack of power 2.3 engine 1991 ford ranger.Code reads 8 flashes pause and then 4 flashes long pause when last did you change your plugs??? check your injectors as well

Question about 1991 Ranger Supercab

1 Answer

...1991 ranger 4.0 auto changed motor trans lost od then changed trans mod lost drive so now all i have is 1 2 reverse new filter trannny fluid fluid wasnt burnt can someone help me with this problem ...

When I try to start the engine gas pours out from under the engine just in front of the cab. Check you fuel lines or may be the fuel filter connection came undone.

1991 Ford Ranger 2.3 L engine no A/C runs cold on the freeway and starts to heat up when I stop or slow down new thermostat last year check the freon/head pressure

1991 8cyl 2.3 liter ford ranger starts then shuts off There is no such thing as a 2.3 Liter 8 Cyl. Ford Engine. You must be counting Spark Plug wires because the 4 Cyl engine has 2 Spark Plugs per ...

...1991 ford ranger fuel gauge stays on full all the time and tank is empty does not go down ever? You need a new sender unit and pump. If you take it out, you can check if the float has come off the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...