Questions & Answers for: 1990 dodge dakota crank sensor

Question about 1995 Dakota

2 Answers

...dodge dakota with a 3.9 liter engine 2wd auto. Can not find crank sensor on 1995 Dodge Dakota how hard is it to replace the sensor should be located in the top of the transmission right behind the ...

Ad

Question about 1994 Dakota Club Cab

1 Answer

...dodge dakota 2wd 318? We are not getting any spark, already replaced computer, egnition coil, rotor coils; yet still not spark. Someone said it may be the crank sensor. Any other suggestions? look on ...

Ad

1990 Dodge Dakota Cooling Fan Problem I have a 1990 Dodge Dakota And The Cooling Fan Only works if i hook it right up to the battery is there a simple way to fix this? I was told it was a sensor, but ...

...locate on a 1998 dodge dakota 2.5 Should be bolted right before the transmission (it has a wire connected to the harness) on the upper side of the engine (near the interior). See Chilton manual

1990 Dodge Dakota 4X4 I have my starter off. I want to replace my crank position sensor, but haven't found where it's at. have a 1991/second month dodge dakota with 5.2 4x4 and it does

Where is the crank position sensor located in a 1990 dodge dakota Replaced coil and truck still won't start It is inside the distributor. See picture below.

...not fire. we have replaced the distributor cap and rotor button and also a new coil. there is a crank position sensor on your dodge. it is located on the top of the transmission on the drivers ...

...dodge dakota shuts off power to coil after driving The auto shut down relay controls power to the coil and fuel injection so if on power is at the coil once the engine dies this is normal check ...

Question about 1990 Dakota

1 Answer

...1990 Dodge Dakota. Dakota won't Start - Discussion on Topix www.topix.com > Dodge Dakota Jan 22, 2009 - have a 1993 dodge dakota sport that wont start. when you turn the key on there is no power to ...

1990 Dodge Dakota LE 3.9L V-6. I cannot find a crankshaft sensor nor a knock sensor, of which both are supposed to be on this engine. I need to know the placement of the crankshaft sensor and knock ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...