solenoid. They do that when they don't get enough power to engage the starter. Checkfor low battery condition and good terminal connections. The easiest test is to have someone that can give you aJump
...wrangler, and I can't get it started. I put a new battery in it and replaced the starter. The lights work inside and out but when you turn the key nothing happens. I tried bypassing the solenoid with ...
1988 Jeep Wrangler My Wrangler does not start. Replaced the starter thinking it would be a quick fix with a replacement part from Auto Zone. The starter was firing but was not engaging the flywheel. I
Question about 1988 Wrangler
...donor car. if that works then now you know why. if not more tests 1988 is it a automatic or manual? what engine? if the battery is fresh and charged , hot wire the starter. does that crank it
Question about 1988 Wrangler
jeep Wrangler wont start, it just make a clicking noise. I changed the battery and nothing....could it be my starter? Could be the starter motor, a bad solenoid or bad battery connections. can be lots
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions