Questions & Answers for: 1988 jeep comanche turn signals

Question about 1988 Comanche

1 Answer

...lights work but when you put the brake on, the front right turn signal goes on. After I changed the headlight switch now the turn signals don't work. HELP???!!! try making sure all the grounds are ...

Ad

...1988 Jeep Comanche Signal lights work fine and the tail lights light up but, whenever i press the break pedal the break lights wont light up on my 1988 Jeep Comanche. Right now my truck is at the ...

Ad

...my 1988 jeep comanche the tail light fuse blows When i start my 1988 jeep comanche the tail light fuse keep burning out change the amp. of the fuse it should be higher than the former fuse you

jeep 88 6 cyl 4.0 liter comanche. When i break the signal lights dont work. they do work fine when not touching the break. Is this normal? No,this is not normal,this normal when the emergency flashers

Question about 1988 Comanche

1 Answer

...Jeep comanache. I have removed the steering wheel and put in a new egnition switch. The blinker arm fell off and I am not sure how to put back together properly. Hope you can help. If it is the old ...

Question about 1987 Comanche

1 Answer

...Jeep Comanche, turn signal issues 87 Jeep Comanche, turn signal lights up brightly, but won't pulse. Hazard lights, however, seem to work correctly. You will find that there are two flasher units on ...

1988 Jeep Comanche transmission will not shift automatically I am not getting power to the computer in the transmission. Need a wiring diagram for 1988 Jeep comanche pickup transmission, it is ...

...turn signal bulb on an 88 comanche. cant figure out how to get too it. which turn signal the front or back if its the back try looking fdor a apartment and stick your hand back towards your lights ...

...1988 jeep comanche wont light,rear does not blink either Hi Sounds like a ground problom or bad socket to the frunt turn signal if the socket liooks rusty or green color i would replace it. you can ...

...1988 Jeep Comanche dont work. I replaced the flasher, and the turn signal switch. The bulbs are also good. The hazards work perfect. When i pull the nob to turn on the lights the turn signal ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...