Questions & Answers for: 1985 chevy 10 fire

...chevy's it is almost always the coil or pickup coil in the distributor hey it is your module or your computer but 9 out of 10 times it is the module it should be on your fire wall, finder well or ...

...1985 chevy blazer k5, and all of a sudden it wont start... no spark!!! replaced ignition module and coil, but still same problem......somebody help please! Check the ignition switch located under the ...

1985 chevy s10 pickup is not getting any fire..I cxhange the ingition module on top of the distributer,change the coil,still no fire,,what next? chech power at the coil and osilateing power at other ...

...1985 chevy suburban, my cigarette lighter is sparking so i want to disconnect the fuse and my panel is not labeld why is your lighter sparking? is a 10 amp fuse. it will likely cause your radio or ...

chevy s 10 2.8 liter pickup won't start. getting fire and fuel to injectors, but when ready to start, fuel doesn't spray out of injectors. Can be clogged althoug its rare to see all clogged up. The ...

...1985 chevy s-10 v-6 It would have to be the ignition switch,or a fusible link on the starter where the positive cable attaches to the solenoid.That is if there is not 12 volts to the coil. Bad ...

need firing order fo 85 chevy s-10 4.3liter 1985 Chevrolet P/U 4WD 4.3 liter V-6 Hope helps (remember to rate and comment this).

chevy-avalanche.html ----------- How does the spark plug wire go on the distributor cap in 1985 Pontiac sunbird? http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wire-go-on.html -----

firing order for chevy 2.5 4 cylinder i didi a tune up even fuel injector i tryed to time it like a v 8 with number one up on compression stroke and running the wire as per the manifold 1342 no 1 cyl ...

1985 chevy s-10 2.5L no gas to injecter. replaced injector, ignition control module, rented a noid light system and there was no blinking from the noid light. Truck has plenty of pressure from the ...