...nighthawk 650 1983. has about 38000 miles. thanks. Ken. please address to Walter Gies and Ken If the bike will start and run and the brakes are good, go ahead and ride it. Chances are all you really ...
...Honda 650 nighthawk; jumps and stalls when put into gear. I have a 82 nighthawk 650 that i just bought, everything on the bike is running fine except when i try to put the bike into gear it jumps and ...
...650 Night Hawk 1983 Why do you think you have a problem with the master cylinder. If it is dry it means the fluid has been lost somewhere in the system and the master cylinder is not necessarily at ...
1983 Honda Nighthawk 650 stopped starting I have power to everything else. When I hit the start button, I hear a click in the starter, but nothing else. Open windings? Thanks for your assistance. Matt
looking for a motorcycle manual for a 1983 honda cb 650 sc nighthawk so I can change my fork seals? Clymer makes one,$35.00.part no. M345,can purchase from most online motorcycle warehouses
...1983 Honda Nighthawk 650. After I run the bike a while the oil lever drops out of sight on the dipstick. If I refill the engine with oil to the top of the dipstick that amount of oil will gush out of ...
...1983 Honda Nighthawk 650? Instructions 1 Remove the front tire with the crescent wrench and set aside. Remove the nut and axle bolt from the tier and use the hammer to remove the axle bolt from the ...
Question about 1984 CB 700 SC Nighthawk
...1983 honda nighthawk 650 cb. tighten first the air screw of your carburetor by turning the screw clockwise. then turn the screw counter clockwise by 3 full turns. readjust according to smoothness of ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions