Questions & Answers for: 1966 mustang fuel gauge working

I'm stuck ! No Fuel, Oil, Amps or temp gauges working? Help ! Behind the dash is what they call a constant voltage regulator. It controls the guages. It's small and located behind the dash near speedo

1966 Ford Mustang Gas Guage not working Replaced fuel tank and fuel tank gas gauge sending unit. Unplugged wire to tank unit and grounded, dash gauge goes to full and empty. All other instruments and ...

...1966 mustang starts and can be driven, but will not start up immediately. After the car sits for a while, the car then starts up again. What could be causing this? I have only driven the car around ...

where to start gas gauge not working on 1966 mustang if anyone knows of a common problem please let me know thanks fuel sending unit . in gas tank

1966 Mustang I6 starting problem 1966 Mustang I6 cranks and fires if i use starter fluid in the air intake, but stops running after a couple of seconds. Sounds like the fuel pump, clogged fuel filter,

...1966 mustang the gas gauge goes to just under 1/4 full. The gas gauge never moves from there. I just bought the car and do know there is an electric fuel pump. anyone have any ideas on what on can do ...

...mustang? The gauges do not work mow. It's called a CVR, constant voltage regulator, to keep all gauges with same voltage all the time, regardless of spikes. They seldom fail. I did not think we used ...

...1966 ford mustang. all my gauges dont work except for the speedometer and the fuses seem fine. how can i get my gauges to work again? Replace the voltage regulator on the back of the instrument ...

...reconnected all was fine 3day later the instrument cluster stopped working speedo feul gauge display would be nice to know what kind of car it is because a 66 mustang doesn't have ANYTHING

...Mustang temperature gauge indicate the engine is running hot, when all tests show it is not running hot? The thermostat and temperature gauge were replaced. However, the temperature gauge still reads ...