...sounded. Need advice disconect the battery for about 15 minutes and turn the head lights on after bat is disconected and then turn head lights off reconect bat and this should reset your alarm
...9-3? OBD II Just disconnect the negative battery terminal for 10 -15 minutes while the ignition switch on run position. Reconnect bat. cable / turn ig. sw. off. Start eng. for more than 10
Question about 2000 F350 Super Duty Super Cab
2000f350 diesel horn blows continuously removed bat cable to disable. Replaced relay but keeps blowing 15 amp fus find the horn and tap it with something sounds like its stuck
15 years, shot oil in cylinders hooked to jumper pack, fired right up. today with jumper or new bat, click click nada, all other electricals on. happened once before years ago, think i replaced one of
wont start. just cranks over. bat dead. crankshaft position sensor maybe. They are cheap. 15 dollars or so at autozone. try that first.
...permit. Check with your state fish and wildlife division. For example, on Florida it’s April 15-Aug. 15. Much more information is available at ...
Can i reset ECM for a 2010 mitsubishi outlander un hook bat. wate 15 min. well reset but well come back on if not fixed
Question about 2005 Ka
...disconnected bat for 15 min but still comes on Stop by a auto parts store, they may read the error code and tell you the needed fix if you are DIYer. Otherwise, see a dealer, or competent repair
Question about 2005 Ka
Replace steering column (new ignition, new key the whole works) in my 2005 dodge neon, security light flashes and stays on. Car won't crank? Try to discounted the bat for 15 minutes that should work
Question about 2005 Ka
bat, 1 huge battery and mine has 2 huge (option 2) to do what I call the hard reset, and all batteries are removed. and AC power pack unplugged. then push power for 15 seconds and release, (hard reset
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions