Questions & Answers for: Porter Cable 150

The compressor will not shut off when it reaches top pressure, over 150 psi. The hose from the head to the tank gets too hot to touch. The pressure controller is bad, so change it.

Porter Cable C2002 150 Psi 6 Gal Compressor. The compressor will come up to about 148 psi and then when it shuts off drop to around 125 psi and stabilize there. I can never get it to hold 150 psi. YOU

The tank pressure is 150 Psi but the regulated pressure is 0. I have never used this compressor. 150 lbs is the amount of pressure in the tank. When you connect a nail gun for instance you cannot nail

tank pressurizes to 150 psi, outlet pressure is zero and unaffected by adjusting the regulator knob replace the regulator

not feeding air to coupler,or hose,bleed tank down ,compressor kicks on @90,shuts off at 150,still no air available at couopler ,unit 2 yrs old,used lightly Try tightning your regulator all the way, ...

...is capable of attaining, thus it does not shut off.  The compressor is capable of developing 150 psi and is noted as having a "120 psi cut-in pressure".  When you say it doesn't shut ...

Porter Cable pancake rated at 150 PSI stops at 135 PSI. It has done this since it was new. 150 PSI pancake has never pumped to 150 PSI. IT always stops at 135 PSI. If it's pumping up to 135 ...

...its correct psi. The pressure switch is set to 175, however the safety valve activates at about 150 or even less. How do I fix it? The maximum pressure on most small compressors is 10 bar or ...

...a question, what is meant by regulated pressure? In addition my unit stops at 120 & never goes to 150. The regulated pressure is at the output of the pressure regulator i/e the air pressure being ...

Porter Cable 150 psi 6 gal compressor tank builds up to 150 psi but 'regulated air' stays at zero and, of course, no air out. Thanks The attached link provides a work around, There are repair kits ...