...Error 13 is pumping time exceeded. So, in general, the issue is pump related. Things to check would be if the pump is blocked (it can be cleaned out if you can get the service door in the front panel ...
...13 error code on my Bosch 500 series washer. The drain pump impeller was plugged. Access the drain impeller at the bottom front right corner. Just put a pen in the hole and turn the cover. Then you ...
...Error Code 13 Washer won't drain Hi I have a Bosch Nexxt 300 Series Washer. It keeps coming up with an E:13 error code and won't drain. Please help. First, unplug your washer. After that find the ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
...13 on the display. I called Bosch and was told to reset the breaker. I did that, started the washer again, and received the same error code towards the end of the cycle. Now, my clothes are locked in ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
error code 13 on my 5oo plus series washer, it will not coplete the load or unlock the door, im afraid the clothes are going to start smelling On the small round disk at the bottom right...insert a ...
Question about Nexxt 500 WFMC3301 Front Load Washer
...error code E:13 Hi, the emergency latch release is behind the small round panel below the main tub door. A string will be threaded through the pump housing and you just need to pull it to open the ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
error code E:13 on my 500 plus series washer Hi, The E13 error code on your Bosch washer refer to a drainage problem or the pump time might have been exceeded Either it might be due to a clogged pump,
Question about Nexxt 500 Plus WFMC5301UC
...13 error code on my Bosch 500 series washer. The drain pump impeller was plugged. Access the drain impeller at the bottom front right corner. Just put a pen in the hole and turn the cover. Then ...
...error e 13 Our Bosch nexxt 500 plus series washer gives an error code of E: and keeps flashing .... plugged it in and out still same error.... door is locked closed....no error number is displayed ...
Question about Nexxt 500 Plus WFMC5301UC
...error code 13. What to do The code means that the water is taking to long to pump out unsrew the pump filter at the bottom front right have some towel ready to soak up the water clean and replace ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions