...kia sedona v6 engine there is usually a tensioner pulley that keeps the belt tight. With the correct size wrench you would turn the pulley either cw or ccw (in turning the bolt in the middle of the ...
...kia sedona serpentine belt there is apulley below alternator loosen the 14mm nut on that pulley then from the bottom there is a 14mm bolt loosen that and belt will come off reverse step to reinstall ...
...Kia Sedona There is a tensioner pulley that has a nut in the middle of it, loosen that nut and there is a tensioner bolt that when you loosen it, it slides the pulley away from the belt to replace
...05 Kia Sedona Where is the inner belt tensioner for a 2005 Kia Sedona located? It is below the power steering pump pulley, there is a nut in the middle of the pulley that you loosen and then loosen ...
2007 kia sedona serpentine belt diagram how to loosen tensioning pulley to change drive belt on 2007 Kia Sedona
...kia sedona van how do i change the serpentine belts on a 2004 kia sedona van There is a tensioner pulley for each belt, you loosen the nut on the front of the pulley, then there is a tensioner bolt ...
...kia sedona You will need a breaker bar to release the tensioner. A breaker bar is a long ratchet that doesn't ratchet. The breaker bar size for your car is 1/2". You will see a square hole on the ...
...Kia Sedona Click on the following free, direct Link. It has the Serpentine Belt Diagrams you will need. ...
kia sedona One of the pulleys in a serpentine system is a tensioner pulley. It's a small pulley usually on a spring loaded arm. You need to find a wrench or socket that fits the bolt on the pulley and
...Kia Sedona 2008 engine 3.8 see the videos ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions