Questions & Answers for: 04 hyundai santa fe stays

hyundai santa fe 03 running problems hi I'm working in a hyundai santa fe 03 has a problem running, some times I press gas and loose power or shakes,or some times when I'm in the traffic light with ...

how can i pull the engine code on my 04 hyundai how can i pull the engine code on my 04 hyundai santa fe with an OBD II scanner

Hyundai santa fe 2.0 CRTD struggles below 2000 revs EGR valve has been blanked of but still same problem run fault codes and replace faulty sensors.

I keep getting random misfires and have been told it may be the ignition misfire sensor. Where is it located on a 2.4L 04 Hyundai Santa Fe? Thank you. There is no such sensor. Check your plugs

...04 sante fe 3.5L it will start but wont stay running i replaced the tps and the mas air flow sensors and it still does the same thing it will stay running if i keep my foot on the gas pedal wont stay ...

...hyundai 3.5L santa fe So I changed the cam shaft position sensor on my 04 Santa Fe which has the 3.5L V6. After changing it, it wouldn't start. I then replaced the ignition failure sensor, which ...

...do I pull Ignition switch? I haven't personally worked on the ignition switch, but this link might help... ...

04 Hyundai Santa Fe, when of the fog light does not work. Even when you put a new bulb in it. fog lights in a 2004 Hyundai Santa fe IS THE SOCKET GOOD (ANY CRUD BUILD UP IN THE SOCKET) CHECK THE WIRES

...04 Hyundai Santa Fe and I am putting my heads back together but the cam bearing cap bolts are cracking when I torque them. I need the part number for the bolts!!! op for 04 Hyundai Santa Fe en... on ...

04 santa fe no battery power to ign head lights Check fusible links for voltage. Note the ignition switch, top two wires are voltage. Make sure battery has a full charge and battery connections all ...