http://www.fixya.com/support/zanussi/washing_machinesSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 30 Nov 2009 07:50:03 GMT80http://www.fixya.com/support/t3327494-error_e20My Zanussi washing machine stops mid cycle and displays error E20. It restarts fine but then the error shows again after a few minutesMon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t3320780-error_90_mean_zanussi_fjs1225wWhat Does Error 90 Mean on Zanussi FJS1225W Washing Machine Thank You!Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t3152175-when_zanussi_aquacycle_1200xc_fastwhen my zanussi aquacycle 1200xc is on the fast spin cycle the spinning drum seems to be getting noisier of late.Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t3079425-unable_use_zj1217_start_pause_flashingI have a zanussi ZJ1217 washing machine, today it stopped mid cycle and refused to spin. Drained it , cleaned filter and reset the programs and now it won't enter any program the start/pause light simply flashes after the soap draw has water go in...Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t2979437-zanussi_zwd1261_works_fine_exceptZanussi ZWD1261 washer dryer works fine except right at the end of the program when it has finished its final spin the machine rotates slowly before it turns off. However this one keeps turning slowly and never turns off unless you move the program...Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t2764988-zanussi_f1045w_grinding_when_spinningmy zanussi f1045w is grinding when spinning what could the problem beMon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t2722529-very_bad_smell_coming_from_washerThere is a very bad smell coming from the washer and when we use the tumble dryer the clothes come out smelly too.Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t2595086-zanussi_zwx1605wMy machine wont wash my clothes, when you start the machine it starts putting some water into the machine then the program skips straight to drain. If I set a spin only cycle that works fine.Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t2558609-wjs_1397w_water_goes_in_okwjs 1397W. The water goes in OK. The recirculation pump starts, then it does no more, it just sits there recycling, the timer does not progress. On a cold rinse it does the same so I assume it's not a heater problem. On a drying cycle the fan starts,...Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t2458562-zanussi_washer_just_keeps_trying_drainwhen i switch it on to wash it starts draining and doesnt stop. i manually filled the drum up with water and it pumps fine but wont stop.Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t2381080-help_washing_machine_shows_e60_errorhelp.washing machine shows e60 error.i need to know how to fix it cheaply! i tried all of the above but no luck.Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t2146331-cycle_starts_continual_humming_noWashing machine starts whirring as though it is starting a cycle, but thats as far as it gets. It whirs and churns as though it is filling, but it does this continually until I have to turn it off incase it burns itself out. Have drained through...Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t1924920-washing_cycle_stops_after_minuteI HAVE A ZANUSSI JETSYSTEM1200 XC6 (FJDR 1266W) MACHINE THAT STOPPED MID CYCLE BEFORE THE SPIN KICKED IN, AND NOW STOPS AFTER ABOUT A MINUTE AS IF IT IS NOT READING THE PROGRAMME AND THE DISPLAY JUST HAS 3 DASHES THAT BLINK. THE MIDDLE THREE...Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t1782714-fitting_door_seal_zanussi_electroluxfitting of door seal on zanussi electrolux washing machine model aquacycle 1200 xc6 how do you get the the the door seal fitted finding it impossible almostMon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t1776499-zanussi_aquacycle_1050_sHi I have a Zanussi Aquacycle 1050, and it's started to leak from inside the drum I think when fulling up, the front door seal is fine, any ideas what it could be and how I could fix the problem?Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t1504318-grey_sludge_washingMy Zanussi 1254W seems to be throwing grey slimy sludge back over my washing. I've tried using a washing machine cleaner at high temp. and fitting an inline anti-syphon device to no avail. Any ideas?Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t1491346-just_switchesH i, I have a Zanussi FS1455 W washing machine. When I set the programme and press the start button the washer clicks into start mode as it would normally do, but then it does absolutely nothing ! Please help! Thank you.Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t1487874-ge_profile_front_load_washing_machinecan't get the washing machine out of demo mode !!!!!!Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t1402945-zanussi_washing_machineMy Zanussi FJDR 1666W Jetsystem 1600 keeps flashing up E20 and I dont know what this means i have problem of washing machine saying e20 what that mean pls HHHeeelp meMon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t846197-zanussi_fc1200wWashing machine does not spin and drain water.The machine is a Zanussi Electrolux Essential 1200. It washes but does not spin and drain. Could someone be of any assistance please?Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t808175-e50_codeMy electric went off 30 mins before the end of the cyle. When the electric came on again the error code E50 displayed. Everytime I select a programme the E50 error comes on again. I have cleaned out the filter but the E50 still comes on. Can you helpMon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t660427-zanussi_washing_machine_wjd1357sMy machine blows the fuse when trying to heat the water. How easy is it to change element. Regards brian CummingsMon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t533125-bleep_noisewould like to be able to turn the bleep noise off when the washing machine has finishedMon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t228572-replacing_bearingsI need to replace the bearings on my zanussi, could anyone let me know how to do this or point me towards any manuals that will explain how to perform this task, thanks.Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t180161-haier_hw_c1460tveme_u_error_7_helphi wondered if you can help me just bought a new machine and for some reason it is not working and keeps flashing err 7 but i have not got the manual. i phoned the place i bought it from and they said they have no idea? please help ive just come off...Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t160421-error_code_oneI have not come across this before, switching on the machine brings up 1 in the display but machine is dead. I have changed the door interlock,checked motor brushes ,valves,heater & thermistor and pump. While the machine is on displaying this...Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t152775-err20_no_drainagei have just moved to a new house. I have plumbed my washing machine into the existing pipe work that was left for I presume a washing machine. I turned it on and all seemed well until it was time to drain the the water, it made a sort of gurgling...Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t131397-fitting_new_door_sealHi I could do with some advise on how to renew the door seal on my Zanussi IZ washing machine.Any help would me great..ThaanksMon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t128831-washer_startMy washing machine selects the correct programme and locks the door but will not start thr cycle.Also the door will now not open at all. Can anyone help please?Thank you.Mon, 30 Nov 2009 07:50:03 GMThttp://www.fixya.com/support/t123437-washer_spin_when_in_wash_cycleAfter a couple of mns after starting a program (full or empty of clothes in the drum) the washer goes into spin and obviously water leaks. The filter is clean and seal at the door isn't broken so i don't think it is a blockage.I had a similar problem...Mon, 30 Nov 2009 07:50:03 GMT