<?xml version="1.0" encoding="us-ascii"?><rss version="2.0"><channel><title>Zanussi Dishwashers Technical Support</title><link>http://www.fixya.com/support/zanussi/dishwashers</link><description>Solved  technical support problems provided by FixYa users.</description><language>en-us</language><copyright>Copyright (c) 2007  FixYa, LTD.  All rights reserved.</copyright><webMaster>info@fixya.com</webMaster><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate><ttl>80</ttl><item><title>water not getting hot</title><link>http://www.fixya.com/support/t2973285-water_not_getting_hot</link><description>Programs are running but the water is cold</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>The dishwasher runs, but never seems to wash the dishes!</title><link>http://www.fixya.com/support/t2311943-dishwasher_runs_but_never_seems_wash</link><description>I have a Zanussi Dishwasher DW 917 which isn't working.  It doesn't seem to be getting enough water into the machine (although it does have some).  There is also a pool of dirty looking water in the well at the bottom.  And when we run it at night,...</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>Cycle starts but water doesn't fill past heating elements.</title><link>http://www.fixya.com/support/t2094646-cycle_starts_but_water_doesnt_fill_past</link><description>The machine starts the cycle by draining any water then tries to fill for the heating stage. A sensor must trip before the right water level is reached because the heating elements start to heat in clear air, melting the plastic cutlery tray! Is this...</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>Zanussi DCE 5655 dish washer</title><link>http://www.fixya.com/support/t1721086-zanussi_dce_5655_dish_washer</link><description>dish washer motor going to empty water but even when power switch is turned off, motor remains running to empty water. also the bank of programme light do not operate. the programme started as normal when i initially filled it up and switched the...</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>NEED A SERVICE MANUAL</title><link>http://www.fixya.com/support/t1639877-need_service_manual</link><description>i am looking for the service manual of dishwasher, make: Zanussi, Model # LS9P,</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>The water wont heat in the dishwasher</title><link>http://www.fixya.com/support/t1474752-water_wont_heat_in_dishwasher</link><description>Its not my machine and it was half striped when I arrived there but they told me that the water wasnt heating and that the water preasure was bad too.</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>no water</title><link>http://www.fixya.com/support/t1088451-no_water</link><description>no water entering dishwasher</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>zanussi zt485 built in</title><link>http://www.fixya.com/support/t860253-zanussi_zt485_built_in</link><description>when i press on/off button nothing happening ??checked fuse in plug its ok ?? any ideas please thanks bill</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>water not coming into dishwasher</title><link>http://www.fixya.com/support/t424334-water_not_coming_into_dishwasher</link><description>water not coming into dishwasher</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>zanussi zdt6053 will not fill with water</title><link>http://www.fixya.com/support/t354275-zanussi_zdt6053_will_not_fill_water</link><description>zanussi zdt6053 will not fill with water, on any programme, it appears to try to start and makes a moise as if pumping, but there is not water to drain, and pump appears to operate if water is poured into the machine</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>ZSF4126 - where do i put rinse aid!?</title><link>http://www.fixya.com/support/t212930-zsf4126_put_rinse_aid</link><description>I have a new dishwasher ZSF4126 but cannot find where to put the rinseaid. What looks like the well for it in the door actually is a dial with numbers.

Any ideas?

Thanks</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>Water not heating</title><link>http://www.fixya.com/support/t203545-water_not_heating</link><description>My Zanussi ZSF6160 dishwasher (2 years old)stopped heating during both the wash and drying cycles.  A repair man imediately suspected the control relay rather than the heating element.  He subsequently dismantled the control module and found a black...</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>Oh No</title><link>http://www.fixya.com/support/t159684-oh_no</link><description>Now both the program light and the wash light are flashing together and the machine stops working altogether after a minute.</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>Zanussi DE540X</title><link>http://www.fixya.com/support/t141247-zanussi_de540x</link><description>Dear Tresilla

Thankyou for your reply, my dishwasher does not get hot at all but stays stone cold throughout its cycle.
As mentioned in earlier correspondance, i have tested the heater which seems ok, therefore is the problem likely to be the...</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>Zanussi DE6755</title><link>http://www.fixya.com/support/t136445-zanussi_de6755</link><description>Have not been able to 'reset' programs and have lost users manual.  When dishwasher is turned on now, it automatically flashes the 3hr and 6hr lights (top right), and starts cycle on 70 but then stops, with the two bottom R red lights flashing as...</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>Dishwasher stuck on wash cycle and water does not heat up</title><link>http://www.fixya.com/support/t1373655-dishwasher_stuck_wash_cycle_water_not</link><description>My dishwasher is stuck on the wash cycle no matter what programme I choose. It is also not heating the water.</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>I brought a Zanussi ZDT6053  integrated. - Fixed  in position - buttons light up but does not fill in oor start.</title><link>http://www.fixya.com/support/t473109-brought_zanussi_zdt6053_integrated</link><description>A new Zanussi purchased at a store, I managed tio remove the old one and fixed this new unit - this is an integrated unit. All buttons light up properly, but when program it, ie. say set on 75 heat or quick wash or any, shut the door, but dopes not...</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>water is not heating</title><link>http://www.fixya.com/support/t467705-water_not_heating</link><description>the water is not heating, could this be due to an element failure, relay failure or something else? How would I go about checking? thanks</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>zanussi da4342 dishwasher</title><link>http://www.fixya.com/support/t349083-zanussi_da4342_dishwasher</link><description>hi , dishwasher sounds like its filling and draining ok, but washing at all, any help , cheers tony</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>ZDT5052 flashes quickwash light</title><link>http://www.fixya.com/support/t285982-zdt5052_flashes_quickwash_light</link><description>Hi, My Zanussi ZDT5052 stops after draining water and last program(50-degree quick wash) light starts to flash quickly. It happens sometimes with first water drain, sometimes after last drain. Some cycles are washed normally, but then again, for an...</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>IZZI Built-in Dishwasher</title><link>http://www.fixya.com/support/t190966-izzi_built_in_dishwasher</link><description>I have a dishwasher that sticks, it fills with water, drops the tablet &amp; does a part wash but then, the program button starts flashing and will not do anything else,it heats the water ok but when I open the door, there is still water inside yet if I...</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>Won't work</title><link>http://www.fixya.com/support/t178923-work</link><description>When i turn the machine on the on/off button lights up but the program lights don't, any ideas??</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item><item><title>ZDI6041 - program cycle does not move on</title><link>http://www.fixya.com/support/t433806-zdi6041_program_cycle_not_move</link><description>This suddenly started to happen, if I select any of the programs they start ok (water enters etc..) but the program does not move on, will stay at the same place early in the program cycle for hours. You can move the program on manually and the water...</description><pubDate>Sun, 20 Dec 2009 16:02:10 GMT</pubDate></item></channel></rss>