I just hooked up my new TR1512 and it appears to be recharging my new bank of batteries (6ea of 6v,...
(More)
I just hooked up my new TR1512 and it appears to be recharging my new bank of batteries (6ea of 6v, two connected in series for 12v all three 12v banks connected in parallel.) Anyway, upon connecting the batteries up to the inverter, with AC still not supplied, the inverter indicated a fault code of "F09." I then applied AC and that's when it appeared to commence charging and I assumed that fault was due to the low charge of the batteries. However, they've been charging for about three hours now and the number on the panel is still just "3." Assuming that's 3 percent charged. Shouldn't it be charging a tad faster than that with 120VAC/60hz supplied? One note, that voltage is being supplied through 14 gauge wire but it isn't hot at all to indicate an inferior size.
I Have disconnected the batteries and have flipped switch back and forth to get trouble shooting...
(More)
I Have disconnected the batteries and have flipped switch back and forth to get trouble shooting mode #1 LED stays on.Shore line disconnected. How can I get it to reset? molymansch@aol.com
Problem with Xantrex XS400 Sine Wave Inverter. I believe the GFCI on the unit has failed and needs...
(More)
Problem with Xantrex XS400 Sine Wave Inverter. I believe the GFCI on the unit has failed and needs replacement. Is it a standard GFCI that I can replace myself?
My charger is not bringing my batteries to full charge. After charging all night the panel reads...
(More)
My charger is not bringing my batteries to full charge. After charging all night the panel reads 13.4 but quickly drops when used.
Precise Engine Repair proudly represents Briggs & Str... Read More
Precise Engine Repair proudly represents Briggs & Stratton, Honda, Kohler, Tecumseh, Onan engines and Drainzit oil drain systems. Our goal is to offer free information, along with giving you an outlet to buy genuine original equipment manufacturer (OEM) parts at a discount.
